null

Your Product Has Been Added to Cart
View Cart

Feuling 472 Reaper HP+ Chain Drive Camshaft Kit for '17-Up Harley Davidson Touring

SKU: 0925-1326
$499.95
(No reviews yet) Write a Review
Feuling 472 Reaper HP+ Chain Drive Camshaft Kit for '17-Up Harley Davidson Touring

Feuling 472 Reaper HP+ Chain Drive Camshaft Kit for '17-Up Harley Davidson Touring

472 Chain Drive Cam, RACE SERIES Lifters, Install kit

 

  • Includes camshafts, lifters and a cam installation kit that includes the cam bearing, cam/crank hardware
  • Kit also includes gasket/O-ring kit that allows installation of Feuling Heavy-Duty HP+ .0165" wall one-piece pushrods or factory one-piece pushrods
  • Includes HP+​ lifters
  • Made in the U.S.A.

472 CAM - The 472 Reaper is a great all-around camshaft. The 472 is for the rider looking for a little more than our 465 grind and wanting a quick and easy bolt-in installation. The 472 has a great bottom end with substantial gains above 2,800 RPM when compared to stock. Responds very well to increased bore and or compression, exhaust system and air cleaner.

Use of performance valve-springs is not required but may result in a quieter, smoother running valve-train (Feuling #1107 or #1108)

472 Reaper Cam Specs

Intake: .468 Valve Lift, 8 Open, 25 Close, 213 Duration @ 50, .117 lift @ TDC, 98.5 Lobe Centerline

Exhaust: .472 Valve Lift, 50.7 Open, 7.75 Close, 238 Duration @ 50, .110 lift @ TDC, 111.5 Lobe Centerline

Overlap: 16

*Cam specs measured in the engine on the lifter @ 0.050 using a 1.61 rocker arm ratio

 

NOTE: Due to the unstable nature of this 4-valve engine design with one rocker arm activating two valve springs, Feuling highly recommends running one-piece pushrods (Click here PART #0928-0091) over quick-install adjustable pushrods to maintain maximum cam/valve lift and reduce valvetrain harmonics and associated hydraulic lifter issues.

NOTE: Feuling fastener kit (Click here PART #2401-0994) also highly recommended to help prevent cylinder head cracking; kit replaces the rocker shaft bolts with studs and nuts to help reduce the stress of the rocker shaft standoffs.

YearMakeModel
2017 - 2020 Harley-Davidson CVO Electra Glide Ultra Limited FLHTKSE
2018 - 2020 Harley-Davidson CVO Road Glide Custom FLTRXSE
2017 - 2020 Harley-Davidson CVO Street Glide FLHXSE
2017 - 2020 Harley-Davidson Electra Glide Police FLHTPI
2019 - 2020 Harley-Davidson Electra Glide Standard EFI FLHTI
2017 - 2019 Harley-Davidson Electra Glide Ultra Classic EFI FLHTCUI
2017 - 2020 Harley-Davidson Electra Glide Ultra Limited FLHTK
2017 - 2019 Harley-Davidson Electra Glide Ultra Limited Low FLHTKL
2017 - 2020 Harley-Davidson Road Glide Custom FLTRX
2020 Harley-Davidson Road Glide Limited FLTRK
2017 - 2020 Harley-Davidson Road Glide Special FLTRXS
2017 - 2019 Harley-Davidson Road Glide Ultra FLTRU
2017 - 2020 Harley-Davidson Road King EFI FLHR
2017 - 2020 Harley-Davidson Road King Special FLHRXS
2017 - 2020 Harley-Davidson Street Glide EFI FLHX
2017 - 2020 Harley-Davidson Street Glide Special FLHXS

Disclaimer: NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLE. Not legal for sale or use on any EPA pollution controlled motor vehicle.

//Initialize Klaviyo object immediately on page load //Added to Cart