MRI Electric Center Stand for Harley-Davidson Touring Models 1997 to 2021
Note: Will not work with exhaust headers that cross under the frame. Use a True Dual Header, a 2-into-one exhaust, or a side dump style exhaust system.
MRI Electric Center Stands fit Harley Davidson Touring Bikes from 1997 to present. These stands bolt on in minutes and use a linear actuator to raise and lower the legs electronically. An air ride system must be used to lower the bike/stand to the ground. The two legs provide a very sturdy base, allowing the bike to sit upright while parked. Available in powder coated black.
All MRI Electric Center Stands have been redesigned to make fitment for all customers a breeze. No more measuring is needed!
Fitment Notes:
- A. 2006 and 1997
- NOTE: Models with Legend Air Ride: The compressor unit will need to be moved from under the bike and relocated
- B. 2007 and 2008
- NOTE: Models with Legend Air Ride: The compressor unit will need to be moved from under the bike and relocated.
- C. 2009 – 2016:
- NOTE: Does NOT work with cross under exhaust.
- NOTE: Models with Legend Air Ride: The compressor unit will need to be moved from under the bike and relocated.
- D. 2017 and Later:
- NOTE: Does NOT work with cross under exhaust.
- NOTE: This stand works with Harley Davidson’s new “Milwaukee Eight” engine and S&S 124cc engine conversion (09-18 bikes).
- NOTE: Models with Legend Air Ride: The compressor unit will need to be moved from under the bike and relocated.
Wheel Size |
Front and Rear Air Ride Suspension |
Rear Air Ride Suspension Only |
Legend Air Ride Suspension |
21" 23" 26" |
Leg Kit #1 |
Leg Kit #1 |
Leg Kit #3/4 |
30" 32" | Leg Kit #1-3.5 | Leg Kit #1 | Leg Kit #3/4 |