null

Your Product Has Been Added to Cart
View Cart

Hawg Halters X-26 Bolt-On Neck Rake Kit 2009-2013 Harley Davidson FLH Models for 26 inch wheel

SKU: BNK41FLAX2609
$1,699.95 $1,529.96
(You save $169.99)
(No reviews yet) Write a Review
Hawg Halters X-26 Bolt-On Neck Rake Kit 2009-2013 Harley Davidson FLH Models for 26 inch wheel

HHI is proud to announce the arrival of the X-26® family of Bolt-On Neck Rake Kits for 26 inch wheel installation. Designed and manufactured in our facility using only US produced 6061- T6 billet aluminum and 4150 high strength steel alloy, this leading edge, multi piece neck design delivers unmatched strength and secure attachment.  Based on proven press fit technology the results are perfect frame alignment, maximum assembly and installation rigidity with superior performance and handling.

The X-26® is a complete Bolt-On solution for the dealer, custom shop or experienced rider that does not want to cut and weld their chassis. This precise Bolt – On Neck Rake Kit allows you to convert your ride easily and get it back on the road with a minimum delay and loss of seat time. There are no warranties voided, no potential for error and installations can even be reversed if necessary.

The HHI Bolt-On Neck Rake Kit is compatible with factory suspension using stock clearances and suspension travel and is fully compatible with most custom air suspension systems.

X-26® Neck Rake Kit Specifications:

  • Ride Height / Frame Clearance: 5 3/4“
  • Finish: Black Anodized
  • Air Suspension: Compatible all years.
  • Ride Height and Clearances: The X-26® Neck Rake Kit maintains stock clearances and full suspension travel.
  • Warranty: Limited Life Time Hawg Halters Warranty

HHI X-26® Bolt-On Kits contain black anodized Triple Tree Neck Kit, hardware, installation instructions and, for 2013-earlier installs, the correct Fork Extensions.

  • Manufactured from 6061-T6 billet aluminum and 4150 high-strength steel alloy
  • Bolt-on 26" wheel installation
  • Secure attachment and unmatched strength
  • Proven press fit technology
  • Compatible with factory suspensions using stock clearances
  • Exceptional frame clearance, handling and stability
  • Made in the U.S.A.
 NOTE: Raked necks change the handling characteristics of the motorcycle. Use caution until familiar with the changes.
 
For Wheel Size Imperial 26"
For Wheel Size Metric 660 mm
Material 6061 T-6 Billet Aluminum
Product Name Neck Kit
Rake Degree 38°
YearMakeModel
2009 - 2013 Harley-Davidson Electra Glide Classic EFI FLHTCI
2009 Harley-Davidson Electra Glide Standard EFI FLHTI
2009 - 2013 Harley-Davidson Electra Glide Ultra Classic EFI FLHTCUI
2010 - 2013 Harley-Davidson Electra Glide Ultra Limited FLHTK
2009 - 2013 Harley-Davidson Road King Classic EFI FLHRC
2009 - 2013 Harley-Davidson Road King EFI FLHR
2009 - 2013 Harley-Davidson Street Glide EFI FLHX
//Initialize Klaviyo object immediately on page load //Added to Cart