Your Product Has Been Added to Cart
View Cart

Custom Dynamics Magic Strobes RSG Brake Light & Turn Signal Flasher for Harley-Davidson Touring Models w/ OEM Rear LED Tailights

SKU: 2050-0223


(No reviews yet) Write a Review
Custom Dynamics Magic Strobes RSG Brake Light

Like it? Share it!


Magic Strobes RSG Brake Light & Turn Signal Flasher for Harley-Davidson Touring Models

 Plug and play installation on 2014-Present Harley Davidson Street Glides, Road Glides, Road King Special models. Applies brake flash/strobe patterns to Custom Dynamics® Rear 1157 LED bullet style run, brake, and turn signals. To provide clear signals, normal turn signal flash will automatically override the brake flash/strobe when simultaneously braking and turning.

 Plug and Play installation on 2014-2019 Electra Glide® Ultra Classic®/Lo, Ultra Limited/Lo, Road Glide® Ultra and 2016 Road Glide Ultra CVO™ and 2016-2019 Limited CVO™ applies brake flash/strobe patterns to LED Squareback or Laydown rear center taillight (does not flash Tour-Pak). Unit also allows Fillerz® to flash/strobe when functioning as Run/Brake/Turn. Alternatively use the original Magic Strobes™ BCM to flash only the center taillight. Use in conjunction with our Magic Strobes™ LTP2 to apply brake flash/strobe patterns to Tour-Pak.

*Only Compatible with USA Model Harley-Davidson® Motorcycles.

*Requires the use of Custom Dynamics® LEDs (or any low power current draw LEDs) in the rear. The use of Incandescent or High-Power LEDs (greater than 84 Watts or 6 Amps) will cause the unit to fail and void warranty*

Riders can easily select from 10 flash/strobe patterns by simply spinning the dial on the Magic Strobes™ Brake Light Flasher module! It has a sleek design and compact dimensions: 4.2" x 1.4" x 0.6". 

Although this device has been designed to significantly increase your braking visibility, flash/strobe patterns may not be street legal

  • 10-user selectable flash/strobe patterns
  • Over-current/thermal/short circuit/reverse wiring protection
  • 84W, 12V system
  • Sealed weather-tight case
  • PART #2050-0280 applies brake flash/strobe pattern to center run/brake portion of stock LED Tour-Pak®​; and left and right side sections if BCM has been programmed to provide brake on the sides of the tour pak
  • Measures 2.25" L x 1.25" W x .5" H

Prop 65 WarningCA Residents WARNING: This product can expose you to chemicals including lead and lead components, which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to