Ciro Adjustable Frame Mounted Highway Peg Mount Kit for '09-Up Harley Davidson Touring and Trike - Standard or Extended (Select Finish)

Ciro Adjustable Frame Mounted Highway Peg Mount Kit for '09-Up Harley Davidson Touring and '09-Up Trike - Standard or Extended (See Fitments Below)

Features

• Fully adjustable
• Replaces factory front floorboard mount, no drilling or modifications are needed for installation
• Works with or without engine guards
• No interference with the lower fairings
• Mounts to factory bolt locations
• Gullwing designed mounting bracket
• Constructed from cast steel
• Standard length (4" long, center to center) or extended length (5-1/2" long, center to center)
• Riders with an inseam of 34" or longer use extended length
• Includes left mount, right mount, two extension arms, two female clevis mounts, and hardware installation kit

Notes

• Some H-D Defiance Rider Floorboards (P/N 50500640) may require minor modifications on the underside to be compatible with Ciro Frame Mounted Adjustable Highway Pegs.
• The Harley-Davidson Empire Rider Footboards (P/N 50501932 & 50501933) will have limited arm adjustments toward the rider.
• Some aftermarket exhausts require floorboard spacers, and if spacers are already installed, you will need an additional one to mount the Ciro Frame Mounted Highway Pegs; A longer bolt (3/8-16) may also be required, which can be sourced from most hardware stores or your exhaust manufacturer.
• Not compatible with 2023.5+ models equipped with H-D Switchback Mini Floorboards (P/N 50502668 or 50502669), as well as the 2024 CVO Road Glide ST with factory mini floorboards (conversion to full-size floorboards is required for use on these models).
• (Image of Black Standard Length is actually the Black Extended Length)