Kuryakyn ISO-Board Floorboards for Indian and Metric Cruisers (Driver or Passenger) REQUIRES SPLINED ADAPTERS (sold separately)
Install footboards in place of a footpeg!
These kits include our finely chromed ISO-Boards and a cast bracket to connect the board to the slip-resistant splined adapter (sold separately).
FITMENT NOTES:
- Boards should not be installed in place of a footpeg on a peg mount secured with a single fastener and no anti-rotation mechanism. The board will apply too much force and loosen the mount from the bike.
- Passenger applications utilizing P/N 7916 requires 1" clearance from bottom of footpeg mount and exhaust. Sits 1" farther out than stock. P/N 4455 is recommended for Passenger use only; bracket design elevates board above existing peg locations about 1-1/4".
- P/N 7916 can be used for Driver or Passenger.
- Verify operation of existing shift lever and brake pedal will not be adversely affected by installation.
WARNING: Cancer & Reproductive Harm - www.p65warnings.ca.gov
