Cobra FI2000R Digital Fuel Processor O2 Closed Loop Model for 2017 FL/Touring Models Utilizing Oxygen Sensors [692-1631CL]
The new 2017 Harley Milwaukee Eight engines utilizing oxygen sensors and closed-loop technology will greatly benefit from a FI2000R Digital Fuel Processor.
Your motorcycle is set up very lean at the factory to pass EPA regulations. This leanness can rob power and make the engines run very hot. The FI2000R accurately adjusts the fuel-injected engine's air/fuel ratio in order for it to run properly.
The Fi2000 O2 digital fuel processor is designed to work with all H-D exhaust systems (stock or aftermarket) equipped with oxygen sensors in place.
Best of all it works much like a carburetor jet kit with adjustments similar to the air-mixture screw, the needle and clip positions and the main jet.
The Fi2000R has connectors that snap directly into the bike's fuel injector bodies, making installation even easier than the Fi2000 models
Operates with three preset adjustment screws called Pots:
Pot 1 and 2: adjust low speed and mid-range settings that should take care of most lean air/fuel mixture problems
Pot 3: is for high range settings and functions much like a main jet on a carburetor (This third tuning option is for use with engines that have high flow air filters, extensive modifications such as big-bore kits, higher compression or other performance increases where more fuel is required in order for the engine to run properly in full-throttle positions.)
Improves overall rideability and virtually eliminates backfiring on deceleration
Installs quickly and easily and comes with detailed tuning instructions (There are no computer settings to make nor Internet downloads to configure)
The new 2017 Harley Milwaukee Eight engines utilizing oxygen sensors and closed-loop technology will greatly benefit from a FI2000R Digital Fuel Processor.
Your motorcycle is set up very lean at the factory to pass EPA regulations. This leanness can rob power and make the engines run very hot. The FI2000R accurately adjusts the fuel-injected engine's air/fuel ratio in order for it to run properly.
The Fi2000 O2 digital fuel processor is designed to work with all H-D exhaust systems (stock or aftermarket) equipped with oxygen sensors in place.
Best of all it works much like a carburetor jet kit with adjustments similar to the air-mixture screw, the needle and clip positions and the main jet.
The Fi2000R has connectors that snap directly into the bike's fuel injector bodies, making installation even easier than the Fi2000 models
Operates with three preset adjustment screws called Pots:
Pot 1 and 2: adjust low speed and mid-range settings that should take care of most lean air/fuel mixture problems
Pot 3: is for high range settings and functions much like a main jet on a carburetor (This third tuning option is for use with engines that have high flow air filters, extensive modifications such as big-bore kits, higher compression or other performance increases where more fuel is required in order for the engine to run properly in full-throttle positions.)
Improves overall rideability and virtually eliminates backfiring on deceleration
Installs quickly and easily and comes with detailed tuning instructions (There are no computer settings to make nor Internet downloads to configure)
