Note: This module works with Incandescent Lighting, L.E.D. lighting, or a combo of both. This module is designed for use with motorcycles equipped with two brake lights located side-by-side. DO NOT install this module into a car or truck's brake light turn signal system as it could interfere with the proper operation of those systems and cause confusion to following drivers

• Compact, solid state electronic module converts your ordinary brake light into an attention getting visual alerting device to create more visibilty and conspicuity when you are stopped or stopping

• There are two modes to use: One emits 5 alternating quick flashes of the left and right brake lights, followed by 3 short flashes and 4 short flashes of both brake lights. The 4 short flashes automatically repeat as long as the brakes are held

• The other emits 5 alternating quick flashes of the left and right brake lights, followed by 3 short flashes of both brake lights and then the brake light remains steady until the brakes are released

• The pattern is not random, it's been selected for it's ability to gain and retain the following driver's attention

• Simple installation: install in line with your brake light wire, between the brake light switch and the brake light

• Large power capacity: 12 volts DC, max. capacity 10 amps

• Compact size: 2 1/4" L x 1 5/8" W x 5/8" H

• Sealed weather resistant heat sink case

• One year limited warranty